1920~2020nm thulium-doped fiber amplifier
Thulium-doped fiber amplifier (TDFA) can be used to amplify 2μband laser signals in the power range of -10dBm~+10dBm, and the saturated output power can reach up to 40dBm, which is often used to increase the emission power of laser light sources.
characteristic
Wide wavelength range
High output power
Low noise
apply
Optical fiber communication
Fiber optic sensing
Fiber lasers
parameter
Wavelength ：1920~2020nm
Input power:：-10~+10dB
Saturation output power:20/23/25/26/27/30/33/37/40
Noise figure：≤5.0dB
Polarization-dependent gain: <0.3dB
Polarization mode dispersion: 0.5ps
Input/output isolation:≥35dB
Optical power monitoring: output optical power monitoring
Pigtail type and connector: Single SMF-28
Pigtail joint type: FC/APC
Working mode:Automatic Current Control (ACC)，/Automatic Power Control (APC)
Control mode: RS232 serial communication
Communication interface: DB9 Female
Electricity Desktop： 100~240V AC, <30W
Electricity module：12V DC, <60W
Desktop Size：260(W)×280(D)×120(H)mm
module Size：139(W)×235(D)×70(H)mm
Operating temperature：5 ~ 35°C
Operating humidity：0~70%
