1524nm-1572nm C++ band gain flat erbium-doped fiber amplifier
C++ band gain flat erbium-doped fiber amplifier is a fiber optic amplifier product dedicated to optical fiber communication system, which can amplify multiple wavelength signals in the C++ band at the same time, covering the wavelength range of 1524-1572nm (frequency 190.65~196.675THz), and keep the gain consistency between wavelengths, and the gain flatness ≤ 1.5 dB. It has the advantages of ultra-wide spectrum, high gain, low noise and flat gain.
characteristic
High gain factor
High output power
Multi-wavelength gain flat
apply
Optical fiber communication
Fiber optic sensing
Fiber lasers
parameter
Wavelength ：1524nm~1572nm
Total Wavelengths: 120 wavelength spacing 50G (0.4nm)
Single wavelength input power: -13dBm
Total Input Power: 8 (120 wavelength total power)
Total output power: 24dBm
Gain factor: 16dB
Noise Figure: 5.5dB
Gain flatness: 1.5dB
Polarization-dependent gain: <0.3dB
Polarization mode dispersion: 0.5ps
Input/output isolation:≥35dB
Optical power monitoring: output optical power monitoring
Pigtail type and connector:SMF-28
Pigtail joint type: FC/APC
Working mode:ACC/ APC/ AGC
Desktop control mode: button/RS232 serial port communication
Module control mode: RS232 serial port communication
Control mode: DB9 Female
Electricity Desktop： 100~240V AC, <30W
Electricity module：5V DC, <15W
Desktop Size：260(W)×280(D)×120(H)mm
module Size：125(W)×150(D)×20(H)mm
Operating temperature：5 ~ 35°C
Operating humidity：0~70%
