1030~1080nm ytterbium-doped fiber amplifier
Ytterbium-doped fiber amplifier (YDFA) pumps ytterbium-doped fiber through a semiconductor laser to generate gain, which is used to amplify laser signals in the 1030~1080nm band, Hi1060 single-mode fiber or PM980 polarization-maintaining fiber output, the output power is continuously adjustable, and has the advantages of high gain and low noise. The desktop YDFA is easy to operate, and the pump current and output power can be adjusted by the user via the front panel buttons. A more compact modular YDFA is also available for easy system integration. Both desktop YDFA and modular YDFA can support software control and serial port command control.
characteristic
Wide wavelength range
High output power
Low noise
apply
Nonlinear optics
Fiber optic sensing
Fiber lasers
parameter
Wavelength ：1030nm~1080nm
Input power:：0~10dBm
Saturation output power: 17/20/23/25/26/27/30/33/37/40(@0dBm Input)
Noise figure：≤5.0dB
Polarization-dependent gain: <0.3
Polarization extinction ratio: 20dB
Input/output isolation:≥35dB
Optical power monitoring: output optical power monitoring
Pigtail type and connector: Single Hi-1060 ,Polarization PM980.
Pigtail joint type: FC/APC
Working mode:Automatic Current Control (ACC)，/Automatic Power Control (APC)
Control mode：RS232 serial port communication
Communication interface: DB9 Female
Electricity Desktop： 100~240V AC, <30W
Electricity module：5V DC, <15W
Desktop Size 17~27dBm：260(W)×320(D)×120(H)mm
Desktop Size 30~40dBm：360(W)×350(D)×120(H)mm
module Size 17~20dBm：125(W)×150(D)×20(H)mm
module Size 23~27dBm：139(W)×206(D)×27(H)mm
module Size 30~40dBm：139(W)×235(D)×70(H)mm
Operating temperature：5 ~ 35°C
Operating humidity：0~70%
