Osram PLT5 488nm 60mw 5.6mm Laser Diode LD
Osram PLT5 488nm 60mw 5.6mm Laser Diode LD

Price:   $99.00

Add to Cart:     

Details: Osram PLT5 488nm 60mw 5.6mm Laser Diode LD

Features:
  • Optical output power (continuous wave):60mW (TCase=25)
  • Typical emission wavelength: 488 nm
  • Efficient radiation source for cw and pulsed operation
  • Single transverse mode semiconductor laser
  • High modulation bandwidth
  • TO56 package with monitor and ESD protection diode
Besondere Merkmale:
  • Optische Ausgangsleistung (Dauerstrich-Betrieb):
  • 60 mW (TCase = 25)
  • Typ. Emissionswellenlnge: 488 nm
  • Effiziente Strahlungsquelle Dauerstrich- und
  • gepulsten Betriebsmodus
  • Transversal Monomode Halbleiterlaser
  • Hohe Modulationsbandbreite
  • TO56 Photodiode and ESD
  • Schutzdiode
Applications:
  • Biomedical Applications
  • Metrology
Anwendungen:
  • Bio- und Medizintechnik
  • Messtechnik
Safety Advice
Depending on the mode of operation, these devices emit highly concentrated visible light which
can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions found in IEC 60825-1 Safety of laser products.

Sicherheitshinweise:
Je nach Betriebsart emittieren diese Bauteile
hochkonzentrierte, sichtbare Strahlung, die gefhrlich
menschliche Auge sein kann. Produkte, die
diese Bauteile enthalten, msen gemden
Sicherheitsrichtlinien der IEC-Norm 60825-1 behandelt werden.








Important notes of operation for laser diode
a) Electrical operation
OSRAMs laser diodes are designed for maximum performance and reliability. Operating the laser diodeabove the maximum rating even for very short periods of time can damage the laser
diode or reduce its lifetime.The laser diode must be operated with a suitable power supply with, minimized electrical noise.The laser diode is very sensitive to electrostatic discharge (ESD).Proper precautions must be taken.

b) Mounting instructions
In order to maintain the lifetime of the laser diode proper heat management is essential. Due to the design of the laser diode heat is dissipated only through the base plate of the diodes body. A proper heat conducting interconnection between the diodes base plate and the heat sink must be maintained.