Laser 1064nm Pulsed 30W for Laser Engrave Aluminum Other Metal. Most of the specifications can be customized according to customer requirements.
Up to 30W, 1064 nm DPSS laser with Q-switched, high peak power
Features:
Output Power up to 30W
TEC cooling system
Lightweight, compact design
High peak power
High repetition rate
Short pulse duration
Best reliability and lifetime
Wavelength (nm):1064+-1
Operating mode:Q-switched: AOM (Acousto-Optic Modulation)
Single pulse energy (mJ):5~10
Pulse duration (ns): ~85
Peak power (kW): 50~100
Rep. rate (kHz): 1~100, adjustable
Average power (W): Average power (W) = Single pulse energy (mJ) * Rep. rate (kHz), 50~100@10kHz, typical
Ave power stability (over 4 hours):<3%
Warm-up time (minutes):<10
Beam divergence, full angle (mrad):<3.5
Beam diameter at the aperture (mm):~7.0
Beam height from base plate (mm):65.0
Cooled method:Water Cooled
Operating temperature (℃):15~35
Power supply (220/110VAC):PSU-HPL-Q(4U)
Expected lifetime (hours):10000
Warranty period:1 year
Pilot light (optional) 5mW @650nm
Applications:
Carving
Laser marking
Measure
Scientific research and experiment
Optical instrument
