CO2 Laser Power Supply for 100W CO2 Laser Tubes

Add to Cart:

220V/110V CO2 laser power supply for 100W CO2 laser tube.

Input Voltage : AC 220V or AC 110V (to be specified)
AC frequency : 47-440HZ
Cold Surge Current : <60A(AC220V) <30A(AC110)
Current Leakage :<0.7mA(AC220V) <0.4mA(AC110V)
Maximum Output Voltage : DC 50KV
Maximum Output Current : DC 38mA
Efficiency : >90%(Full Load)
Mean Time Between Failure (MTBF) : >10000 hours
Response Speed : <1ms (from the given switch signal to the 90% of the setting current)
Control Interface : TTL level switch control, high or low effective level can be chosen
Withstand Voltage : Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell.
Protection :it can work under open-circuit condition for a short time
Environment : Operating Temperature-10~40℃,Relative Humidity (RH)<90%
Cooling Way : Force-Air Cooling (FAC)
Weight : 6.0kg (13.228lb.)
Size : 20cm x 12cm x 15cm (7.87in x 4.72in x 5.91in)

10600nm laser safety glasses 
O.D 4+ CE certified

Add to Cart:

Copyright © 2017 BeamQ Lasers.