635nm 638nm 300mW Red Laser Diode Mitsubishi ML520G71

$69.00
Add to Cart:

635nm 638nm 300mW Red Laser Diode Mitsubishi ML520G71.

Brand New Mitsubishi red laser diode
Country of Origin: Japan
Output Power: CW = 300mW
Pulse power:> 500mW
Typical wavelength: 638nm
Operating Current: <400mA
Operating voltage :1.9-2 .6 V
Pulse Conditions: Pulse duty cycle ≤ 25%, pulse frequency ≥ 50Hz
Operating temperature: -5 to +55 C
Storage temperature: -40 to +100 C
Package: T018 (5.6MM)
Working life: more than 10,000 hours

Please refer to the datasheet here.






Attention

1.Laser beam is harm for eyes during process please avoid any directly see on the aperture.

2.Please use the suitable LD power driver, instant reverse current can not exceed than 25uA reverse voltage cannot exceed than 2V,otherwise the LD will be damaged.

3.Please install the LD well before connecting to the power.The initial input voltage should be zero.

4.To increase/ decrease the current gradually for avoiding any current pulse which will damage the LD.

5.Please store or use the LD under dry and air flow ambient.To avoid any situation of condensation which will damage the LD.

6.Working under high temperature will increase the threshold current and decrease the efficiency conversion,speed up the aging of the LD.

7.The exceed power output will speed up the aging of the LD.

8.To use the LD with enough head dispensing or uner the cooling ambient.

9.Laser diode belongs to electrostatic sensitive components. Should deal with anti-electrostatic method. To touch the LD directly unless humanbody is well connect with ground. Otherwise the LD will be burned easily. To wear anti-eletrostatic wrist band is necessary.

Add to Cart:

Copyright © 2017 BeamQ Lasers.