355nm UV Solid State Laser

$16,800.00
Add to Cart:

355nm Ultra Violet UV DPSS laser is a new laser technology, widely used in laser cutting and engraving.355nm laser is used in university experiments, however the highest continuous power is < 20mW. If you need higher power, the pulses 355nm UV laser can reach 1000mW (1W). Most of the users install 355nm DPSS laser into engraving machines.


There are four types :

CW ultraviolet laser at 355 nm,
Passively Q-switched ultraviolet laser at 355 nm,
Actively Q-switched ultraviolet laser at 355 nm,
Fiber coupled laser system at 355 nm

Wavelength (nm): 355nm
Output power (W):1000-5000
Working Mode:LD pumped, pulse
Q-Switch: Acousto-Optic
Beam Mode: Transverse mode:TEM00,Longitude :Multi-longitude
Spectral Linewidth (nm) :<0.1
Polarization: Line polarization
Pulse width (ns) :<25 (typical, @ 20KHz)
Repetition Rate (KHz): 20~200
Peak Power (KW) :10 (typical, @5W)
Beam Divergence (full angle, mrad):<1.5
Beam Diameter at Aperture (mm, 1/e2):<1.0 (ytpical)
Beam Roundness:>90%
Power Stability (RMS, over 4 hours):<5%
Dimensions (LWH, mm):330X160X115
Cooling System:TEC+水冷
Warm-up Time (minutes):<15
Operation Temperature (℃):18~30
Expected Lifetime (hours):>10,000
Warranty Time:1 year










Add to Cart:



Customers who bought this product also purchased...


Copyright © 2017 BeamQ Lasers.